Structure And Characteristics Of Anti-bending Metal Waterproof Cable Connector

Product structure:

The main body of Nylon Cable Gland is made of 304 stainless steel, and the locking nut is made of brass. There is a circular protruding step on the outer wall of the middle part of the product, and its appearance is hexagonal. There is an O-ring outside the protruding step to ensure that the product is waterproof and dustproof.

Product features:

The anti-bending metal waterproof cable connector is mainly composed of the connector body, anti-bending spring, seal, and locking nut. Since there are threads at both ends of the connector, it only needs to be rotated according to the direction of the thread to lock the cable.

The spring clamp ring inside the product can not only shield and guide the cable, but also allow the electromagnetic wave to be effectively grounded after the cable is connected, protecting the integrity of the information. When the locking nut is locked, the seal on one side of the connector body can make the cable well fastened to prevent the cable from moving, meet the sealing requirements, and allow the cable to effectively prevent the invasion of rain, sea water, dust, oil, etc. from the outside.

Since the anti-bending metal waterproof cable connector is mainly made of 304 stainless steel, the product has excellent high and low temperature resistance, corrosion resistance, high strength and good vibration resistance. The seal is made of silicone rubber, which not only has good oil resistance and heat resistance, but also can withstand a variety of media, such as hot water, acid, alkali, alcohol, etc.

In addition, since the cable often needs long-term reciprocating movement during work, the overall requirements for the cable connector are relatively high to ensure the normal operation of the cable in the future. The use of anti-bending metal waterproof cable connector can prevent the cable from being worn and broken too quickly.