Standards For Use Of Plastic Waterproof Cable Connectors

Although everyone knows that Nylon Cable Gland is mainly used for cable connection, many users are still confused during use. Once the quality of the connector is poor or some other places do not meet the requirements of use during use, accidents may occur. The following usage standards must be mastered.

1. Before using the plastic waterproof cable connector, various preparations for placement need to be done.

2. It is necessary to combine the reserved length of the cable. A certain length should be reserved at the extreme point of each cable and the connector connection than the actual demand, because a certain amount of cable needs to be consumed during the connection. If the reserved degree is not enough, it will affect the sealing and safety of the connector connection.

3. If you need to remove the plastic waterproof cable connector, you should pay attention to two requirements:

①. The cables to be removed together should be separated from the parts occupied by the plastic heat-proof cable connector

② When removing the cable connector, you need to use a support plate to keep it in a stable position

4. The appearance of the selected plastic waterproof cable connector should be fine, and the size and specifications should be consistent with the cables installed on site.

5. Marking is required at the point where the cable is connected to the plastic waterproof cable connector and at the point where the cable needs to be bent.

6. There should be a clear mark at the point where the cable is directly separated by about 50 to 100 meters and where the cable needs to be connected to the building.

7. At the extreme ends of the cable and the connector connection, the connection must be firm and stable, and there must be no looseness.

8. At the ends of the plastic waterproof cable connector and the cable around it for about 2 to 3 meters, fireproof belts or paint need to be added. In the rain boot environment, high-strength explosion-proof trough boxes also need to be installed.