Selection And Use Of Stainless Steel Cable Connectors

Many people are confused and don't know how to use Nylon Cable Gland. In fact, if you want to know this question, it is very necessary to know its selection problem. Today we will introduce the selection and use of this product to you.

Step 1: First of all, you should be familiar with the occasions where the connector is used. Stainless steel cable connectors can be used in machinery, lighting, shipbuilding and other industries. The conditions for use in different occasions must be different, so you need to have a clear understanding of the occasions where the connector is used, such as size, opening, thread, cable diameter, etc.

Step 2: After mastering the various requirements of the occasion, choose the corresponding connector according to the requirements, such as whether the outer diameter of the thread is metric or German, British or American, and then choose the size of the connector according to the diameter of the cable used.

Step 3: The wall thickness of the occasion of use is also a point that needs to be considered. The thick wall should match the length of the connector thread.

After the selection is completed, it should be used according to the following points:

The first step: screw the threaded end of the connector into the device. Note that some connectors are through-holes instead of threads. At this time, you need to screw the locking nut inside the device. Generally, the nut is matched with the connector, so there is no need to worry about the size of the nut not matching the connector.

The second step is to pass the cable through the connector to keep it in the right position.

The third step: lock the locking nut so that the cable can be well sealed.

After the operation is completed, you can pull the cable by hand to see if it is tightened. If you need to move the cable in the future, you only need to prevent the locking nut from loosening.