Precautions For Installation And Use Of Plastic Waterproof Cable Connectors

In order to make the cable connection safer and more reliable, we need to use Nylon Cable Gland. So what are the precautions during installation and use? Let's take a look at the following introduction.

1. It is necessary to select a suitable plastic waterproof cable connector according to the model and specifications of the cable connector. Since the quality of waterproof connectors on the market is uneven, it is recommended to choose products from big brands.

2. Before installation, you need to read the product manual carefully, especially when the cable specification is 10kV, you need to plan the installation process in advance.

3. For single-core armored cables above 10kV, its terminal connector has and only one end can be grounded with steel strips.

4. If it is a cold-shrink plastic waterproof cable connector, its size has strict requirements and needs to be installed completely according to the drawings.

5. When pressing the copper tube, you need to control the force, not violently, just crimp it in place, and remove the burrs on the copper end face after crimping.

6. When installing the heat-shrink plastic cable connector, if you need to use a blowtorch, the blowtorch cannot be facing only one direction, but needs to move back and forth.

7. Try to avoid installing plastic waterproof cable connectors on rainy days. Once water enters the cable, a short circuit is likely to occur.