Cable Clamp Accessories

Isolation/Separation Pads

Cable Clamp Isolation/Separation Pads are used to ensure that the cable clamp does not come into direct contact with the mounting surface to prevent corrosion between the dissimilar materials. The standard plate is manufactured from low smoke (LSF) material and is prefabricated with knock-out points. These knock-out points allow the isolation pad to be used with any cable clamp. When the cable clamp fixing bolts push out the knock-out points, the isolation pad can be cut to size to match the cable clamp. Installing the isolation pad will prevent galvanic corrosion between the cable clamp and the cable management system.

C-Clamps

The C-Clamps are manufactured to be installed on continuous flat cable ladders, cable racks, or trough mounting frames without grooves or fixing holes to facilitate the assembly of the cable clamp. The C-Clamps are manufactured from 316L stainless steel and are suitable for all cable clamps and can be used with a variety of cable ladders, cable racks and trough mounting frames. One M12 and two M10 light holes are opened, with a variety of mounting options. The C-Clamps have been widely used and passed the tests specified in "Cable Clamps for Electrical Installations" (IEC 61914:2009).

Grid bridge, cable basket clamps

Grid bridge, cable basket clamps are made of 316L stainless steel and are used to safely install cable clamps on grid bridges and cable baskets. The cable basket clamp has one M12 and two M10 holes, and the surface of the clamp is smooth, providing a firm mounting surface for the cable clamp. Grid bridge, cable basket clamps have been widely used and passed the tests specified in "Cable clamps for electrical installations" (IEC 61914:2009).